Sunday, November 23, 2014

Blasted off

Five years ago, I had a local heavy duty mechanic-John come over to take a look at Fillmore to help give me some direction on how to proceed. The conversation started with the usual...
"Wow this is really cool!"
Which was quickly followed by a look at me sideways...
"Have you ever done anything like this before?...This is a BIG project!"
But ignorance was bliss, and I nervously laughed it off and replied
"No but I'm up for the challenge!"
Ever since that day, I have thought back to that conversation, and thought 'little did I know!' It seems with each new chapter a whole new plot line is introduced, many mini plots which,hopefully, are all resolved together at the finale. For now the newest twist is that Fillmore has been stripped down and is standing naked in a public space (recurring nightmare of mine). The good news is that things went exceptionally well, and aside from some areas that had some minor damage and covered with Bondo, things were in really god shape. You can see on the entrance door where someone had run some lead...I guess that would make Fillmore a lead sled...and then a few areas with bondo from different decades.



















The only negative was some oil drumming( I think that is the proper term for it) that happened during the blasting....too much heat generated and the metal popped in on itself. It can be fixed but requires some time with a hammer and dolly. The rear passenger side at the very back has some bigger damage where it had  backed up into something. Some hammer and dollie work will be needed, then some stud welds and pulling as well.
















After the blast, the face and tail will get extra attention, and we can see here where the guys at PET have been working away. Still a long ways to go....but we are making progress and things are moving forward!




Monday, November 17, 2014

Ground Control to Major Tom....

Some of the best songs seem so simple, A tune that is simple in concept, but they are often complex in composition. The average listener is easily taken away on a musical journey and upon return often says....I could sing that!!
Professionals are like that, they become adept at their trade so, to the layman, it looks easy and straight forward. I am sure to them it is, but in reality to the majority of the population it would be a world of hurt to attempt the job, with very poor results. Thus our fascination with Karaoke. Where the average Joe fueled by a  cup or two of courage is encouraged by his/her friends to get up and sing to lyric-less canned music while they sit back and take bets on the likelihood  of a train wreck.
I am always one to say "dare to live" and "YOLO" but there are times to jump and there are times to pass on taking the microphone and calmly stay in your seat.
Painting Fillmore is not a time for me to jump up on the stage, I have chosen to let the pros do their work, and so far it looks great.

The driver's bay, only called such because I got some flack for using the term 'cockpit', has been prepped and painted and I must say it's looking pretty slick.


The rest of the exterior is now up for prepping. Chrome removed,side windows removed, front glass removed.














The side panels are getting a really cool material treatment to protect them from the blaster. The material is a 1/16" rubber compound with the backside has a self adhesive surface on it. They will blast the front cap, sides and rear cap, but the roof will have to be hand prepped as it is aluminum.








Truth be told, if I could turn back time (another song from the 80's) I would have skinned Fillmore to the bones then blasted it all, then re assembled with the new panels. But like building a house, until you've done it you can't say how you'd do it differently until after the first time.





There is no turning back now, as he rolls into the tent ready for blast off...


Ground Control to Major Tom
Take your protein pills and put your helmet on
Ground Control to Major Tom (Ten, Nine, Eight, Seven, Six)
Commencing countdown, engines on (Five, Four, Three)
Check ignition and may God's love be with you (Two, One, Liftoff)

Thursday, November 13, 2014

No one to blame but me.

My Dad said it to me, I've said it to my kids,
 "Careful! Its the last run of the day, and that's when people get hurt!"
 Now before we go any further, relax, I didn't hurt myself again. I'm just referring to the fact that when you are skiing, a statistically significant percentage of injuries happen at the end of the day. You know your tired, both physically and mentally so your body isn't responding as fast as your brain and your brain sees the end of the run and begins to shut down and you make stupid choices.....and often pay the price.


Michelle's Mom and Dad are out for a visit, and I love having them around. It gives me a live in cohort when it comes to projects in the workshop. Today was finally putting together the very last sliding window for Fillmore. You know how it is, the window panes are put together, the frame is cleaned up, the rubber is cut and the fuzzy channel(schlegal) is  there. How hard can it be to put it together?

So Ron and I set out to accomplish the task at hand. All was going so well, the fuzzy channel was installed, the foam and felt seal was placed, the frame was all put together......the last step was to put in what I call the stopper seal. The great big rubber seal that sits against the fixed pane and acts as a hard stop for the sliding pane. We pushed it into place, and then I could see the finish line. My mind started to look two more steps ahead, and like the wide receiver in football who looks where he will go next instead of  concentrating on the catch in that last split second, I dropped the ball. I picked up a soft rubber mallet and started tapping the seal to fully seat it....the taps became more aggressive....and then I just needed one more spot to seat....
Ehhhh crap!.....fumble......wipe out.....full on faceplant.

Monday, November 10, 2014

Looking for Direction



No matter how strong we are, no matter how independent we are we all need someone. The concept of the lone wolf, although a marketable identity for Hollywood and Harlequin romance novel, is a myth in reality. What we need may differ but we all need someone for companionship(emotional), for company(physical), for guidance(spiritual/cerebral)

Sometimes you actively go looking for someone to fill the spot and sometimes fate brings you together. My wife?....I actively perused her. My son? fate (and a bottle of red wine) put us on the course to meeting.

Well Robert,from the great state of Montana, and I got brought together by 35ft and 14000 lbs of fate, and he has helped me keep on course.......literally!

Being a former owner of Fillmore, Robert has an interest in him. So, having read my blog, Robert knew that I only had one original glass front turn signal indicator. Although I had spent many hours in the early years(yes this has been going on long enough for me to actually use that phrase) looking for a replacement, lack of success and attention to other matters allowed the hunt to cease......for me.
So you can appreciate the excitement when I got an email from Robert letting me know that he found one on ebay. After a bit of ebay shenanigans ( I think I was in a bidding war against the seller as a ghost) I ended up winning the right to buy the indicator!!!!
The icing on the cake was when Robert asked if I had decent light bezels, he siad that he had a pair that he was willing to donate to the cause, and they were in "pretty good shape"
Hell they are damn near mint!

And now, with the help of my friends, I will go in the right direction.

Tuesday, October 28, 2014

Primed for Progress

I love what I do. I am grateful and so happy that I am one of the seemingly few who enjoys what he does for a living. Don't get me wrong if I won lotto 6/49 I'm sure I would be singing a different tune, but for now if I need to work then I am thankful that I enjoy my work.
Now, having said all of that I am finding it tremendously difficult not to feel pangs of  self pity that I cannot be actively working on Fillmore during perhaps one of the most visibly transformational stages. As I alluded to earlier, Fillmore has been sanded,masked and now sits ready for primer.
Instead of playing at the body shop, I trudge on to the salt mines and eagerly await an email from Dale at PET Autobody.





The cockpit, the helm, the bridge, whatever moniker tickles your fancy was cleaned up and a coat of grey epoxy primer was applied.




I so wish I could be there, if not to help, then just to watch!!




Thursday, October 23, 2014

Loss of a son

I have been having trouble finding the appropriate words today. I started this blog with feelings of happiness and excitement. I received some pictures from Dale at PET Autobody where Fillmore is getting his face lift. They have masked out some of the interior getting ready for painting the dash and sash and I was thinking along the lines of a lone ranger theme, a "Who was that masked man?".
Given the events of the last 36 hours, it seemed inappropriate to celebrate the appearance of a masked avenger.
My heart goes out to the family of Cpl. Nathan Cirillo who lost his life while guarding Canada's war memorial.  A tragic and senseless loss at the hands of one of our own...
(Bruce MacKinnon/Halifax Chronicle Herald)

Tuesday, October 21, 2014

Naked!

Ever had that recurring dream where you show up at work/school/ the mall and set about to going through the usual motions of the start of your day. But as you move along everyone seems to be staring at you, you then discover that you are wearing no pants....standing there in your "transformers" underwear?..........anyone?.....anyone?......no?....just me then I guess....(uuhhhgh!)

Well Fillmore is in the process of bearing his privates in public. Chrome is off- light bezels, bumpers, mirrors, windows. And now he's just standing there naked!
I went down to PET auto body for some Fillmore time. Knowing that not a lot had been accomplished yet, but we are slowly moving forward. I know full well that my project get shuffled to the back of the line when big clients come in needing something done ASAP. I knew that going in and I am OK with that as long as he's not sitting outside. I figure as long as he is eating up real estate in the shop there will be motivation to keep moving forward on him.
So Dale and I took the opportunity to play with some lines for the paint graphic. These are NOT permanent lines but rather basic ideas of where I want things to go.















So we played for a while placing the lines where we thought they should go......subject to change of course.

















There is a long way to go before we are ready to start laying down paint, but it's nice to play in the shop, where is big and open and clean and warm!




Monday, September 29, 2014

Slim pickin's...but for good reason.

Usually when I get this feeling I am anxious because I know I'm forgetting something. You know what I mean....you're walking around the house randomly looking around, hoping that some visual cue will jog your memory about what you are supposed to do. I have been walking around now with the gist of that feeling in my chest for just over a week. Fillmore has flown the coop. A week ago friday I drove Fillmore into PET autobody to start the body prep and primer process. A process it will be, sandblasting, hand stripping, body work, glass removal, you name it it's going to happen. Now at what rate is the question but the process has started.
Adds and sods. I prepared surfaces that would not have seen paint otherwise, roof vents and perf body panels for the rad.
The dash needed to be stripped and prepared for paint. To try and save me from getting the blasted paint dust everywhere I attempted to wall off the rest of the coach with drop cloths....notice I used the term attempted.
As for myself, I was a little more successful protecting my eyes,ears and lungs from the dust.....
I can't wait to be astonished...............

Friday, September 19, 2014

Thanks Mrs Pohatch

 It's so long ago I can't remember her face, I can't even remember how to spell her name for sure. But I remember how she made me feel. At times like I was the most powerful and proud man on the earth for my achievements, at others I was ashamed to have crossed the line by breaking a golden rule. But as cliche as it sounds all I ever needed to know I learned in kindergarten: 

by Robert Fulghum

Share everything.
Play fair.
Don't hit people.
Put things back where you found them.
Clean up your own mess.
Don't take things that aren't yours.
Say you're sorry when you hurt somebody.
Wash your hands before you eat.
Flush.
Warm cookies and cold milk are good for you.
Live a balanced life -
Learn some and think some
And draw and paint and sing and dance
And play and work everyday some.
Take a nap every afternoon.
When you go out into the world,
Watch out for traffic,
Hold hands and stick together.
Be aware of wonder.


The other day I was making a template for the new bathroom roof vent, and yes as you can see in the pictures I was using the traditional KG work space tools....paper, tape,scissors, and crayons. All was going along so well, until it became apparent that SOMEBODY broke a rule.....  

 Put things back where you found them.

Clean up your own mess.












I guess in my haste last time I used the seam sealer, I didn't properly clean the rim of the lid for the can.......and then I put it where it normally doesn't go....so I didn't notice in my typical travels. So when I went to use it this time....I was stymied. I know better than that....I am better than that.
My bad, sorry!........mia copa.

 After Shawn was here and did such an excellent job on the bumper, I was horrified when I realized that I overlooked a small but very important point. We hadn't treated the interior surface of the rear engine cover. It required the careful removal of the piece of art. It required the removal of 12 fasteners, ranging in size from 1/4" dome heads, to two very large lug nuts.



















Once off, it was just a matter of prepping the surface and then a liberal coating of my favorite POR-15.
 I feel much better now. I had visions of the final paint job, and then the rust creeping up and over the rear engine cover.
 A simple reverse of steps and now everything is back into place, all neat and tidy. A little tip of my hat to my Kindergarten teacher....Thanks Mrs. Pohatch

Wednesday, September 17, 2014

Up on the roof top click, click click!


When out on the roof there arose such a clatter,
I sprang from my bed to see what was the matter.
Away to the window I flew like a flash,
tore open the shutter, and threw up the sash. 
I couldn't help but chuckle, as I madly rush trying to get a bunch of little jobs done. Jobs that I thought "I will have time to do next!" Jobs that I thought " I can file that....it will only take a few minutes" Jobs that I thought ".... Holey @#$....I better get that done!!" I was making noise and scurrying around on Fillmore's roof......and the forecast was for snow in the upcoming days. I'm in a time crunch here....September 19th Fillmore gets shipped away for paint.

First order of business was getting the roof ready for paint.
Rather than having them mask off the moon roof, I decided to remove it to allow them to get a better coverage.
I still needed to trim the interior panels anyway! As it stands its a door to no where
I also wanted to clean and prep the area under the roof vents...





And of course the remnants of the previous owners furnace chimney!
Looking better...still so much more to do....so little time...

Saturday, September 13, 2014

What's in a name?

 Have you ever noticed that we need to be able to understand who people are to feel comfortable around them? I mean it's obvious that this is a generalized statement of the masses but I believe it is a fair general assessment that most of us would fall under. Imagine if you will, you are at a social gathering standing with a group of people when a friend of a friend walks up and joins the conversation. Your buddy turns to you and says "Blake, this is Ken....Ken this is my buddy Blake" you shake hands and then after a minute you turn to Ken and say..." So, Ken! What do you do for a living? Followed by a barrage of questions that help you understand who Ken is, where he's from, who he knows at the party, married?Kids? etc etc.
Why do we do it? Why do we need to categorize someone? I think it helps us to understand what they are like, we tend to fill in the blanks- make assumptions- and the more "pertinent" information we gather the better able we are to make a mental image of the individual.
How many times have you met someone and said...." Hmmm he doesn't seem like a "Bert".....seems more like a Kevin or a Trevor. Now we've taken it one step further and are able to conjure up an assumed personality of a person based on past experiences of others of the same and different names. I can say for sure that I wasn't thinking this deeply when we named our children, I think I was too much in shock....and I wasn't the one who delivered them. But really you have to ask yourself what's in a name?
For example, given that this is a blog about the guy....What does "Fillmore" mean?
  • Your name of Fillmore gives you a highly sensitive, idealistic,and intuitive nature.        
  • -hmmm, ok a little out there but I'll go with it
  • You could be expressive and creative in the arts, music, or drama.
-I'd love for people to look at Fillmore and think that!                    
  • Moods are a problem as you can be highly inspired one minute, and the next become quite irritated and annoyed over some ill-timed remark or lack of consideration on the part of someone close to you.                                                                                          -OK now we are getting into an arena that is kind of spooky
  • You could suffer through nervous breakdowns, as well as disturbing thoughts, which could affect your concentration and memory.
          -And finally I didn't want to hear this because it rings true....one minute everything is running fine, the next minute Fillmore throws a temper tantrum and I'm having him towed to the garage.

Well, whether it's hocus-pocus or not to anticipate someones personality based on their name, the fact remains that we all need to label someone to some degree to help understand them.  
As such it was time to put the name plate on Fillmore...

Last order of business for the rear end work was fabricating a license plate holder.
Shawn jumped on the opportunity to recycle, you'll notice the 1/2" round stock that he used to 'border the name plate. That was the original linkage from the accelerator pedal to the carburetor, it ran on the inside under the floor the entire length of the bus.

A subtle little touch of creating a reverse curve to the plate relative to the bumper and body.
Presentation is can make or break a pitch......the Vanna White and Most interesting man in the world....may cause this gem a little more harm than good.

Oh No! Not again!!

You may remember this time last year I found a  wee problem I had been checking things out and found a significant break in my flywheel hous...